Pumping station knowledge
Your present location: Home >> Knowledge of Pumping Station >>

Points for using emulsion pump station

Source: xe1x.com Author: admin Date: 2019-10-18 16:39 heat:
Points for using emulsion pump station
1. Direction of rotation: The direction of rotation of the motor should be the same as the direction of the arrow shown.
2. Exhaust: After the pump valve is installed or overhauled for the first time, unscrew the bleed screw and exhaust the air in the liquid chamber.
3. Maintain the amount of oil in the lubricating oil tank and extend the service life of the plunger and seal ring.
4. Check the locking screw sleeve of the slider every shift. When loose is found, tighten it in time to ensure that the plunger and the slider are tightly connected.
5. Use a wrench to check frequently and tighten the suction and discharge valve firmly.
6. Observe the rhythm sound of the inlet and outlet valve, the operation of the unloading valve, the reading of the pressure gauge and the oil temperature and oil level of the crankcase (the oil level is above the vernier red line and below the green line).
7, various filters are cleaned once a month to avoid clogging.
8. When the ambient temperature is less than or equal to 0 C, the liquid in the liquid chamber should be drained after stopping the pump to avoid freezing the cabinet.
Keywords: Emulsion Pumping Station
share to: 126

Others also browsed:
  • a